Non slip Tile Adhesive 925 FIX - C1T

925-FIX is a special cementitious adhesive due to its zero vertical slippage and its creamy texture, for laying interior and exterior flooring, interior linings and exterior skirting boards. For gluing ceramic pieces with a medium-high degree of absorption. It has excellent initial adhesion and its creamy texture makes it easy to apply.

PRECAUTIONS AND RECOMMENDATIONS

- Respect mixing water

- On walls, the weight of the pieces must not be ≥30 kg/m²

- Do not apply directly on plaster supports. Apply previously AGMA-CH sealant.

- Do not apply on wooden supports, metal surfaces or PVC.

- Do not apply below 5ºC or above 30ºC.

- Do not apply with risk of frost, rain, strong winds or direct sun.

- Never apply with the technique known as "by points".

- Do not apply in areas where there is a danger of stagnant water.

- Temperatures, ventilation, absorption of the support and coating materials can vary the workability and setting times of the adhesive.

- In extreme weather conditions (very windy or high temperatures) drying occurs faster than normal.

- It is recommended to leave a free perimeter expansion joint between the flooring and the wall or pillar, hidden by the skirting board, of approximately 5 mm.

- For plaster-based supports, prepare the support with AGMA CH (Sealer), avoiding dead plasters and weak plasters.

- Wetting and washing the back of the tile improves adhesion and open time.