Semi Flexible Gel-Tile Adhesive GAMA FIX - C1TE

GAMAFIX is a slightly flexible, one-component gel-adhesive powder with a long open time and zero vertical slip. Allows for diagonal placement of ceramic wall tiles from the top to the bottom, ideal for plasterboard supports. Snow white. Especially suitable for gluing: Double-fired ceramic tiles - Porous single-fired - Porcelain indoors - terracotta and stoneware.

Appropriate supports: plasterboard partitions (plasterboard) suitable for cement plaster, concrete screeds and cellular cement. For interior and exterior floor and wall coverings. This Product is WORK OF SPECIALISTS.

CAUTIONS AND RECOMMENDATIONS

- Respect mixing water

- On walls, the weight of the pieces should not be ≥40 kg / m²

- Always carry out double bonding on exterior walls and for placing largeformat tiles (>30X30cm) and / or high weight.

- Do not apply directly on plaster supports. Previously apply AGMA-CH sealer.

- Do not apply on wooden supports, metallic surfaces or PVC.

- Do not apply under 5ºC or above 30ºC.

- Do not apply with risk of frost, rain, strong winds or direct sunlight.

- Never apply with the technique known as “spot bedding”.

- Do not apply in areas where there is a danger of stagnant water.

- On underfloor heating systems, it must be switched off during the application and in the following seven days.

- Temperatures, ventilation, substrate absorvency and coating materials can vary the workability and setting times of the adhesive.

- In extreme weather conditions (high wind or high temperatures) drying occurs faster than normal.

- It is recommended to leave a free perimeter expansion joint between the flooring and the wall or pillar, hidden by the skirting board, of approximately 5 mm.

- For plaster-based supports, prepare the support with AGMA CH (Sealer), avoiding dead plaster and weak plasters